HEP T5 54W Electronic Dimmable Ballast Single SD154-58

HEP T5 54W Electronic Dimmable Ballast Single

Automatic identification of lamp type.

Ignition with compulsory pre-heating within t 1sec in any dimming position.

Flicker-free dimming from 1% to100% of light flux.

Equipped with 1-10V control input, 250mA sink current.

Short circuit proof.

Open circuit safety.

Auto cutoff protection at lamp end-of-life.

Auto-reset after replacement of defective lamp.

Energy efficiency class EEI=A1.

EMC compliance with EN55015 (RFI suppression), EN61000-3-2 (Harmonics), EN61547,

EN61000-4-2,3,4,5,6,11(Immunity) .

ENEC KEMA certified acc. to EN61347 (Safety), EN60929(Operation).

ENEC KEMA certified acc. EN 60929: 2006, EN 61347-1:2001 + C1:2003,

EN 61347-2-3:2001+A1:2004+A2:2006, EN 55015.

Environmentally friendly components comply with RoHS.

Full Australian Approved

Applications

Hospitals, hotels, office buildings, road/tunnel lighting, airports, railway stations, cinemas,

conference rooms, department stores, museums.When regulating lamps observe their

admissible minus temperature.

Before regulating, burn in lamps without dimming at their full capacity for the duration

required by the lamp manufacturer.